This Firmware flash for Samsung Galaxy S III with the Model Number is GT-I9300. Firmware Region is Germany and CSC code is XEG 1&1. Make sure the Model Number are correct with you device. You can check the Model Number in Setting - About phone (Model Number), If phone can't start you can find it by flipping your phone or among the things you found in the box. This Firmware PDA is I9300XXUGND5 with OS Jelly Bean(Android 4.3) and the Firmware are build on Wed 09 Jul 2014 14:12:11 pm.
Download Firmware Samsung Galaxy S III (GT-I9300)
- AP Version: I9300XXUGND5
- CSC Version: I9300XEGGNE1
- Android Version: Jelly Bean(Android 4.3)
- Region: XEG 1&1
- Country: Germany
- Binary: N/A
Shop on Amazon
How to flash firmware
- Extract (unzip) the GT-I9300_XEG_I9300XXUGND5......I9300XXUGND5.zip file. using WinRAR or 7-Zip.
- Download Odin Tool 3.14.1
- Extract Odin and open it.
- Reboot Samsung Phone in Download Mode (hold Home + Power + Volume Down buttons / hold Volume Down + Bixby buttons then plug-in cable)
- Connect you Samsung Phone and wait until you get a BLUE sign in Odin.
- Add the 1 file Samsung firmware to AP/PDA or 4 files Samsung firmware (AP/BL/CP/CSC) to it's slots.
- Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
- Click the start button, wait for Odin to say 'PASS' in a GREEN sign. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.
|1||GT-I9300||I9300XXUGPE1||AMN||Jelly Bean(Android 4.3)||901.59 MB||Download|
|2||GT-I9300||I9300XXUGNB5||AMN||Jelly Bean(Android 4.3)||885.52 MB||Download|
|3||GT-I9300||I9300XXUGPE1||IDE||Jelly Bean(Android 4.3)||1.07 GB||Download|
|4||GT-I9300||I9300XXUGNB5||IDE||Jelly Bean(Android 4.3)||1.07 GB||Download|
|5||GT-I9300||I9300XXUGPE1||ORO||Jelly Bean(Android 4.3)||899.87 MB||Download|